Aerospace Performance Parts is pleased to offer immediate purchasing options for Bi Technologies Corporation part number SC1073, which you have taken interest in. This Resistor Variable Wire Wound Non item is listed alongside the NSN 5905-00-849-9310 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number SC1073 or any other FSC 5905 Resistors components we carry from Bi Technologies Corporation under CAGE Code 73138, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 5905-00-849-9310 part number SC1073 today, knowing we will support all your operational needs with care.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-849-9310 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008499310 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 629656-1 | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABWV | SHAFT DIAMETER | 0.249 INCHES NOMINAL |
| AEFM | MAXIMUM STOP TORQUE | 350.00 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.0005 INCHES |
| AEGA | LATERAL RUNOUT | 0.004 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.004 INCHES |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 3.667 KILOHMS SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 07217-629656 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| AAPN | SECTION QUANTITY | 1 |
| ABXF | SHAFT LENGTH | 0.875 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 792.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
