Aerospace Performance Parts is pleased to offer immediate purchasing options for Bourns Instruments Inc part number 224S1-150, which you have taken interest in. This Resistor Variable Wire Wound Non item is listed alongside the NSN 5905-00-945-5171 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number 224S1-150 or any other FSC 5905 Resistors components we carry from Bourns Instruments Inc under CAGE Code 80294, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 5905-00-945-5171 part number 224S1-150 today, knowing we will support all your operational needs with care.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-945-5171 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 009455171 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4912695-18 | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.344 INCHES MINIMUM AND 1.662 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.375 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.226 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.306 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.328 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.375 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.095 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.0 OHMS SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 90536-4912695 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
