Aerospace Performance Parts is pleased to offer immediate purchasing options for Caro Inc part number 3416-1205-1235, which you have taken interest in. This Lathe Engine item is listed alongside the NSN 3416-00-449-7188 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number 3416-1205-1235 or any other FSC 3416 Lathes components we carry from Caro Inc under CAGE Code 55985, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 3416-00-449-7188 part number 3416-1205-1235 today, knowing we will support all your operational needs with care.
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | Current Type | AC |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 0.750 |
| ADQR | Center To Center Distance | 35.000 INCHES NOMINAL |
| ELEC | Voltage In Volts | 115.0 AND 230.0 |
| FAAZ | Phase | SINGLE |
| FEAT | Special Features | 1 KNURLING TOOL,LATHE,SELF-CTR.,W/DIAMOND KNURLS 1/2BY1-1/8 IN.SHANK;1 EA MANDREL,EXPANSION,SLEEVE,1/2TO11/16,11/16TO1,1TO1-9/32,1-9/32TO1-9/16 IN-.RNAGE;1 EA,PLATE,ADAPTER,CHUCK MTG,UNFINISHED,5,5-7/8 IN.DIA;1 EA PLATE,FACE,11,5 IN.DIA;1 POST,TOOL;1 EA REST,FOLLOWER,STEADY;1 SCREW,THD DEPTH STOP/SPEC/;1 STOP,THD DEPTH;1 EA WRENCH,BOX,DOUBLE HEAD,12 POINT,LG 15 DEG OFFSET,9/16 AND 5/8,1-1/16 AND 1-1/4 IN. OPENINGS" |
| BTSZ | Spindle Speed Quantity | 8 |
| BTTD | Rated Swing | 12.000 INCHES NOMINAL |
| BTTF | Actual Swing Over Bed | 12.500 INCHES NOMINAL |
| BTWL | Headstock Drive Type | GEARED HEAD |
| FREQ | Frequency In Hertz | 60.0 |
| AKYD | Accessory Components And Quantity | 4 BELTS/V/;1 BUSHING,SPINDLE CTR.;2 CTRS.,TAILSTOCK,HEADSTOCK,NO.2 MORSE TAPER;1 CHUCK,LATHE,IND.,MED.DUTY,4 JAW,10 IN.W/WRENCH;1 CHUCK,LATHE,SCROLL SELF CTR.,MED.DUTY,3 JAW,UNIV.,W/REV.JAWS,6 IN.W/WRENCH;24 CUTTER BIT,TOOL HOLDER H-SPEED STEEL,UNFINISHED,SQ,5/16BY2-3/4 IN.;1 CUTTER BIT,TOOL HOLDER,UNFINISHED,BEVELED,1/8BY3/4BY6 IN.;3 CUTTER BIT,TOOL HOLDER,UNFINISHED,SQ,1/4BY2-1/8 IN.;1 DIAL,INDICATING,THD CHASING;1 DOG SET,1 EA,BENT TAIL,SINGLE SCREW 1/2,3/4,1,1-1/4,1-1/2 IN.CAP;1 HOLDER,CUTTING TOOL,BORING W/BORING BAR,30,45 AND 90 DEG END CAPS,CUTTER BITS AND WRENCH,1/2BY1-1/8 IN.SHANK,3/4 IN.BAR DIA;1 HOLDER,CUTTING OFF,STRAIGHT SHANK,W/CUTTER BIT,AND WRENCH,1/2BY1-1/8 IN.SHANK;1 EA RH,LH,STRAIGHT HOLDER,CUTTING TOOL,TURNING,OFFSET,W/CUTTER BIT AND WRENCH,1/2BY1-1/8 IN.SHANK;1 EA WRENCH,TAILSTOCK,TOOL POST" |
| BTWM | Headstock Center Taper Size Designator | 2 MORSE |
| BTYP | Hole Diameter Through Spindle | 1.313 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYT | Carriage Feed Change Quantity | 57 |
| BTYW | Gear Change Type | QUICK |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
