Aerospace Performance Parts is pleased to offer immediate purchasing options for Dresser Industries Inc part number 60428, which you have taken interest in. This Generator Engine Accessory item is listed alongside the NSN 2920-00-377-5253 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number 60428 or any other FSC 2920 Engine Electrical System Components Nonaircraft components we carry from Dresser Industries Inc under CAGE Code 64104, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 2920-00-377-5253 part number 60428 today, knowing we will support all your operational needs with care.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-377-5253 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 003775253 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1117332 | 2 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.844 INCHES NOMINAL |
| AAUH | SPLINE MINOR DIAMETER | 0.690 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.874 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM |
| AAUK | SPLINE WIDTH | 0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| ABSA | SPLINE QUANTITY | 6 |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| AXFH | SPLINE LENGTH | 2.000 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 950 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | TAPERED SHAFT END,THREADED W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.875 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.500 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 4.277 INCHES MINIMUM AND 4.287 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.371 INCHES MINIMUM AND 5.381 INCHES MAXIMUM |
| BCMG | TOP MOUNTING HOLE DIAMETER | 0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 20 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ZZZV | FSC APPLICATION DATA | ENGINEELECTRICAL SYSTEM,NONAIRCRAFT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
