Aerospace Performance Parts is pleased to offer immediate purchasing options for Federal Specifications part number MILL23400, which you have taken interest in. This Lathe Engine item is listed alongside the NSN 3416-00-517-1051 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number MILL23400 or any other FSC 3416 Lathes components we carry from Federal Specifications under CAGE Code 81348, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 3416-00-517-1051 part number MILL23400 today, knowing we will support all your operational needs with care.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 16 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 28.0 TO 1000.0 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 BELT SET,COMPLETE; 1 CENTER,HALF; 1 CENTER,HEADSTOCK; 1 CENTER,TAILSTOCK; CHUCK,DRILL,1/2 IN. CAPACITY; 1 CHUCK,SPINDLE NOSE,LATHE; 1 CHUCK,3 JAW,UNIVERSAL,6 IN.; 1 CHUCK,4 JAW,INDEPENDENT 8 IN.; 1 COLLECT SET,1/16 IN. TO 1-3/8 IN. RANGE,11 COLLECTS; 1 COOLANT SYSTEM,MOTOR DRIVEN; 1 DOG SET,BENT,1 IN.,2 IN.,3 IN.,4 IN. SIZES; 1 HOLDER,TOOL,KNURLING ARMSTRONG NO. 1K; 1 HOLDER,TOOL,BORING ARMSTRONG NO. 9; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-L; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-R; 1 HOLDER,TOOL,TURNING ARMSTRONG NO. 1R; 1HOLDER,TOOL,TURNING ARMSTRONG NO. 1-L; 1 MANDREL SET,LATHE; 1 MOTOR,5 HP,220/440V,60 CYCLES,3 PHASE,1800 RPM; 1 REST,FOLLOW; 1 STARTER,NON-REVERSING,MAGNETIC; 1 SWITCH,PUSH,REMOE CONTROL; 1 TAPER ATTACHMENT,TELESCOPIC |
| ACDC | CURRENT TYPE | AC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 14 SIZE |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYW | GEAR CHANGE TYPE | QUICK |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 80.0 PER INCH |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 00L127 |
| AWHA | BED TYPE | SOLID |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| FAAZ | PHASE | THREE |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| SR-1 | MANUFACTURERS CODE | 81348 |
| SR-1 | MANUFACTURERS CODE | 81349 |
| APGF | DESIGN TYPE | SCREW |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILL23400 |
| BTTD | RATED SWING | 14.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 14.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 9.000 INCHES NOMINAL |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 3 ASA STANDARD |
| AAXX | MOUNTING TYPE | FLOOR |
| ADQR | CENTER TO CENTER DISTANCE | 30.000 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.406 INCHES NOMINAL |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
