Aerospace Performance Parts is pleased to offer immediate purchasing options for Illinois Tool Works Inc part number 7108155-4, which you have taken interest in. This Gear Helical item is listed alongside the NSN 3020-01-494-4274 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number 7108155-4 or any other FSC 3020 Gear Pulley Sprocket and Transmission Chain components we carry from Illinois Tool Works Inc under CAGE Code 5G804, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 3020-01-494-4274 part number 7108155-4 today, knowing we will support all your operational needs with care.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-494-4274 Item PartTypeName: GEAR,HELICAL | 3020 | 014944274 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7108115-4 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| ABSA | SPLINE QUANTITY | 32 BOTH ENDS |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGAV | END ITEM IDENTIFICATION | GEARBOX,RAMMER DRIVE |
| AGJS | PITCH DIAMETER | 6.1900 INCHES MINIMUM AND 6.2100 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 67 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 2.0000 INCHES NOMINAL BOTH ENDS |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH FLANGE |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.0000 INCHES |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 25.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.458 INCHES BETWEEN BODY AND FLANGE |
| CWRM | FACE NOMINAL WIDTH | 1.4000 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.0500 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.350 INCHES AXIALLY THROUGH FLANGE |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.500 INCHES AXIALLY THROUGH FLANGE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE,RH |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1;MATES WITH P/N H832-1662-3 (NSN 3040-01-494-3543) AND -16 (CAGE 96169);MATCHED PAIR H832-1662-3 & 4 NSN 3020-01-494-0562;NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053;USED ON NSSN CLASS SUBMARINE |
| MATT | III MATERIAL | STEEL COMP E9310 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/1 GR-9310 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
