Aerospace Performance Parts is pleased to offer immediate purchasing options for Maritime Tanksystems International part number 9019-6.4.1, which you have taken interest in. This Hose Assembly Nonmetallic item is listed alongside the NSN 4720-01-431-1355 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number 9019-6.4.1 or any other FSC 4720 Hose and Tubing Flexible components we carry from Maritime Tanksystems International under CAGE Code 0W0U5, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 4720-01-431-1355 part number 9019-6.4.1 today, knowing we will support all your operational needs with care.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-431-1355 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014311355 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 78C-6N-6N-20-24 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | Inside Diameter | 1.250 INCHES NOMINAL |
| AGAV | End Item Identification | USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| ABKU | Flange Thickness | 0.405 INCHES NOMINAL 1ST END |
| ABKV | Outside Diameter | 1.960 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | Maximum Operating Pressure | 5000.0 POUNDS PER SQUARE INCH |
| AKUT | End Flange Construction | SPLIT 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| ADJS | Exterior Color | RED |
| AKUT | End Flange Construction | SPLIT 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| CRDW | Hydrostatic Test Pressure | 10000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 24.000 INCHES NOMINAL OVERALL |
| ZZZK | Specification/Standard Data | SAE J517, 100R13, 81343 NATIONAL STD/SPEC |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | Connection Type | PLAIN FACE FLANGE 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 1ST END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| ABKU | Flange Thickness | 0.495 INCHES NOMINAL 2ND END |
| AEPR | Flange Outside Diameter | 2.125 INCHES NOMINAL 1ST END |
| ACKH | Minimum Inside Bending Radius | 16.500 INCHES |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD | Burst Test Pressure | 20000.0 POUNDS PER SQUARE INCH |
| CRWL | Inside Surface Condition | SMOOTH |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 2ND END |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| AEPR | Flange Outside Diameter | 2.500 INCHES NOMINAL 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 2ND END |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 270 |
| CQCS | Layer Composition And Location | 6TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
