Aerospace Performance Parts is pleased to offer immediate purchasing options for Triumph Aerostructures Llc part number 1292035-101, which you have taken interest in. This Bearing Roller Rod End item is listed alongside the NSN 3110-00-316-5560 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number 1292035-101 or any other FSC 3110 Bearings Antifriction Unmounted components we carry from Triumph Aerostructures Llc under CAGE Code 80378, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 3110-00-316-5560 part number 1292035-101 today, knowing we will support all your operational needs with care.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-316-5560 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 003165560 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1292035-101 | 6 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.7500 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 5.7650 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 2.5500 INCHES MINIMUM AND 2.5700 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.8850 INCHES MINIMUM AND 0.8950 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 4.5000 INCHES NOMINAL |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL |
| CBBL | FEATURES PROVIDED | LUBRICATION HOLE AND LUBRICATION GROOVE AND EXTERNAL LUBRICATION FITTING |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 8.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | PLATING ON EXTERNAL SURFACES OF BEARING,ROLLER ONLY |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | COPPER ALLOY RETAINER |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 4140 OUTSIDE WASHERS |
| MATT | MATERIAL | STEEL COMP 4140 SLEEVE |
| MATT | MATERIAL | STEEL COMP 4340 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE WASHERS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,CONCAVE ROLLERS |
| TEST | TEST DATA DOCUMENT | 36659-LC72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
