Aerospace Performance Parts is pleased to offer immediate purchasing options for Triumph Aerostructures Llc part number 215-48103-5, which you have taken interest in. This Resistor Variable Wire Wound Pre item is listed alongside the NSN 5905-00-089-9527 for ease of identification, with various additional information provided on this page for your reference. Should you wish to obtain solutions on this particular listing, we invite you to complete the Request for Quote (RFQ) form on this page at your earliest convenience. Responses are always offered shortly after we receive and review each request, with solutions we give being fully based on the details we are provided.
Note : We Will Not Share Your Information To Any Third Parties.
If you happen to require expedited shipping for part number 215-48103-5 or any other FSC 5905 Resistors components we carry from Triumph Aerostructures Llc under CAGE Code 80378, be sure to let us know as soon as possible. We would be happy to discuss the options that we can potentially provide, our track record of on-time delivery being a testament to our dedication to customer satisfaction. You can either include such details within your request, or get in touch with staff directly. Otherwise, request a quote on NSN 5905-00-089-9527 part number 215-48103-5 today, knowing we will support all your operational needs with care.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-089-9527 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 000899527 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 215-48103-5 | 2 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR W/TAB/FLANGE MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | 0.900 INCHES MINIMUM |
| ABHP | OVERALL LENGTH | 11.580 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.000 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.201 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.188 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 4.830 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 6.110 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.950 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.930 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.201 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,THREADED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.440 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 5.550 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 12.5 KILOHMS ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/0.50 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 ALL SECTIONS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6250.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 80378-215-48103-5 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
